XLink Kai tunnels the Nintendo Switch's LAN multiplayer over the internet, so LAN-mode games can be played online with people anywhere. This guide follows Team XLink's official Nintendo Switch setup guide and covers only the stock LAN path that works on unmodified consoles.
Which games work on an unmodified Switch. Switch games fall into two groups on XLink Kai. The 25 games with LAN support (such as Mario Kart 8 Deluxe, ARMS, Splatoon 2 and 3) play on unmodified consoles, Switch Lite, modded CFW consoles and the Ryujinx emulator. The 198 games with Local Wireless support cannot be played on an unmodified console - those need a modded CFW console (see Team XLink's CFW Switch guide on their wiki) or the Ryujinx emulator. Those CFW and emulator routes are separate setups and are not covered by this guide. Check the supported games list to see which group your game is in.
Use your own legally obtained copy. We recommend that you use your own legally obtained copy of the game and that you do not share it. ROM does not condone illegally downloading ROMs.
Requirements
- A Nintendo Switch console.
- One of the 25 supported games with the LAN feature.
- A PC, Mac or Raspberry Pi on the same network.
- One or more Ethernet cables, depending on your setup; for a wired Switch connection you need a USB Ethernet adapter for the dock (OLED docks have one built in).
- An internet connection.
Create an XLink Kai account
- Open teamxlink.co.uk and click Sign Up, fill in your details and submit.
- Verify your email address and consent to the XLink Kai data collection policy. Read the Acceptable Use Policy before playing.
Install XLink Kai
Download and install the client for your computer's operating system from the XLink Kai home page.
Connect the console
Wired (recommended): plug a USB Ethernet adapter into your Switch dock (or use the OLED dock's built-in port) and connect both the Switch and the computer to your router with Ethernet cables. This gives the lowest latency and the most stable link. If you use a third-party Ethernet adapter and the Switch is not detected, add it as a Custom Console Mapping:
- On the Switch, open System Settings > Internet, connect via the wired connection and note the LAN MAC address shown next to the adapter.
- On the XLink Kai website, sign in, click your username and open Edit profile.
- Under Custom console mappings, enter the adapter's MAC address, select Nintendo Switch in the console dropdown and submit.
- Restart Kai and check Metrics after running a connection test on the console.
Wireless: if wiring is impossible, connect the Switch and the computer to the same wireless network - this works, at the cost of stability.
Set the console's IP address: every console on XLink Kai needs a unique IP, which Team XLink builds from the last 4 digits of your console's MAC address:
- On the Switch home menu open System Settings > Internet. For a wired connection, note the last 4 digits of the adapter's LAN MAC address shown next to it (the same value used for Custom Console Mapping above); for a wireless connection, note the last 4 digits of the System MAC Address, as the official guide instructs.
- Open the IP address calculator, select Nintendo Switch, enter those 4 digits and click Calculate IP Address.
- Follow the on-screen instructions to set that IP on the console.
Play
- Start XLink Kai on the computer and log in.
- Power on the Switch and load a game with LAN support.
- In Kai, open Game Arenas and navigate to your game's arena.
- In the game, enter its LAN mode and search for or try to join a match. LAN mode is a distinct option from Local Wireless play and the exact steps vary per game - in Mario Kart 8 Deluxe, for example, hold the L and R buttons on the game menu and press the left stick in so that "Wireless Play" switches to "LAN Play", then select LAN Play (per Nintendo's LAN Play instructions). Then open Kai's Metrics tab - your Nintendo Switch should appear with "Configured OK". If it does not, recheck the network setup above.
- Join a match and play. Some games (Mario Kart 8 Deluxe, Splatoon 2) require every player to run the same game version - update the game if you cannot see or join a match.
Finding players
Join the Team XLink Discord and use the game-specific channels - several fan-run Discords also host regular game nights. Kai's status page is status.teamxlink.co.uk. Still stuck? Email [email protected] or ask on the Discord.