ROMUnite.

Type a game, a player's name, a console or a way to play online.

Sign in

Connect an Xbox 360 to XLink Kai

XLink Kai · Real Xbox 360 (real hardware) · updated Nov 16, 2026 by Andrew4Lyf

For Real Xbox 360 Plays with xemu on XLink Kai Not with Xenia Canary Not checked with Dolphin · Real GameCube · Ryubing (Ryujinx) · Real Nintendo Switch · PCSX2 · Real PS2 · RPCS3 · Real PS3 · Real PSP · Vita3K · Real PS Vita · Real Xbox

Read in: EnglishDeutschEspañolFrançais日本語PolskiPortuguêsРусский

XLink Kai tunnels the Xbox 360's system-link LAN traffic over the internet, so you can play LAN multiplayer online with people anywhere. This guide follows Team XLink's official Xbox 360 setup guide.

Important: the 30 ms ping limit. Unmodified Xbox 360 consoles refuse system-link play with anyone more than 30 ms of latency away, which makes online system link impossible for most users on a retail console. A JTAG/RGH-modified console can bypass this limit with the RGH ping patch enabled, and is what Team XLink recommends. An unmodified console can still host if every other player is under 30 ms away or runs the RGH ping patch. This limit does not apply to original Xbox games played under backwards compatibility.

Use your own legally obtained copy. We recommend that you use your own legally obtained copy of the game and that you do not share it. ROM does not condone illegally downloading ROMs.

Requirements

  • An Xbox 360 console.
  • One of the 216 games with the system-link feature - check the supported games list or look for "System Link" on the back of the game case.
  • A PC, Mac or Raspberry Pi on the same network.
  • One or two Ethernet cables, depending on your setup.
  • An internet connection.
  • You cannot play system link over the Xbox 360's own WiFi - the official wireless adapter and the built-in WiFi of slim consoles cannot be used for system link. The console must be wired.

Create an XLink Kai account

  1. Open teamxlink.co.uk and click Sign Up, fill in your details and submit.
  2. Verify your email address and consent to the XLink Kai data collection policy. Read the Acceptable Use Policy before playing.

Install XLink Kai

Download the installer for your computer's operating system from the XLink Kai home page - Team XLink maintains install guides for Windows XP through 11, macOS, Raspberry Pi and ChromeOS; their Quick Start notes a desktop Linux install guide is still pending.

Connect the console

Fully wired (recommended): connect both the Xbox 360 and the computer to your router with Ethernet cables. This gives the lowest latency and the most stable link.

Semi-wireless: if the computer cannot be wired to the router, connect the Xbox 360 directly to the computer's Ethernet port and let the computer reach the internet over WiFi. A USB Ethernet adapter works if the computer has no Ethernet port. You do not need to bridge adapters or enable internet connection sharing - only the computer needs internet access.

The Xbox 360 has no Ethernet link light. To confirm the link is up, check the link lights on the device at the other end of the cable (router, laptop or USB adapter) while the console is powered on.

Play

Using Halo: Reach as the example:

  1. Start XLink Kai on the computer and log in.
  2. Power on the Xbox 360 and load a system-link game.
  3. In Kai, open Game Arenas and navigate to your game's arena.
  4. In Halo: Reach, select Main Menu and press A, then press Y, choose System Link Games and press A. Available matches appear on the right side of the screen.
  5. To join a match, press right, then down twice, then A, select Join Player and press A. If Join Player is greyed out, your game version (title update) does not match the host's - compare the version number in the bottom right corner of the main menu; no number means version 1.0.
  6. Wait for the Party Leader (the host) to start the match.

If no matches appear, open Kai's Metrics tab: your Xbox 360 should be listed. If it is missing, recheck the cabling, run Kai with administrator rights and allow it in the computer's firewall. Also check your ping to the host - click their name in the Kai WebUI (or hover the coloured bar under it); an unmodified console needs under 30 ms.

Finding players

Join the Team XLink Discord and use the game-specific channels - several fan-run Discords also host regular game nights. Kai's status page is status.teamxlink.co.uk.

If it does not work

  • System Link is greyed out in game: check that the Ethernet cable is firmly connected at both ends; try another cable and rule out a bad port on the console and on the router or PC.
  • "No connection" under a player's name: Kai could not open a P2P connection - a closed port on your side or theirs. UPnP usually handles this; if it happens often, manually forward the UDP port shown in Kai's configuration menu to the computer running Kai, keep your router's DMZ disabled, and restart Kai or the router. With two routers (double NAT), set one to bridge mode.
  • You can ping players but see no matches: have someone in the arena search for matches while you watch Metrics - inbound broadcast traffic should tick up from 0. If it stays 0, check that Kai is allowed through every firewall on the network path.
  • The network adapter is missing from Kai's configuration menu on Windows: a known WinPcap bug when a network driver was installed after WinPcap. Open an admin command prompt and run net stop npf followed by net start npf.
  • Retail and modded consoles are both supported by XLink Kai.

Still stuck? Email [email protected] or ask on the Team XLink Discord.

Play it with people

Find people to play Xbox 360 with

Be the first here to play Xbox 360 online. Open a lobby and the site pings everyone who plays it.

Nothing open right now. Open a lobby and the members who play it hear about it.