The same XLink Kai tunnel also works in the PCSX2 emulator. Since PCSX2's DEV9 overhaul, the emulator supports DHCP interception and bridged adapter mode, so PCSX2 can play LAN-enabled PS2 games online through XLink Kai - and because XLink only tunnels the LAN traffic, emulator and real-console players meet in the same matches.
Use your own legally obtained copy. We recommend that you use your own legally obtained copy of the game (dumped from your own disc). ROM does not condone illegally downloading ROMs.
What you need
- The latest PCSX2 build from the official PCSX2 downloads page.
- A PS2 BIOS dumped from your own console, following the official PCSX2 documentation.
- One of the 56 supported system-link games - also check the game's entry on the PCSX2 compatibility list.
- On Windows: Npcap (the packet-capture driver).
- A free XLink Kai account.
Account and client
- Sign up on the XLink Kai home page and verify your email address.
- Download and install the client for your OS. On Windows, Kai needs WinPcap or Npcap and works with either.
Configure PCSX2
The official XLink guide documents these steps on Windows; it notes the PCSX2-side settings are the same on macOS and Linux except the Npcap install (Npcap is Windows software), and Kai's own install guides cover Windows and macOS, with a desktop Linux guide still pending.
- On Windows, install Npcap with the default options. If WinPcap was installed earlier, Npcap replaces it; Kai works with either.
- In PCSX2, select your BIOS under Settings > BIOS (first-time setup already does this), then open Settings > Network & HDD and tick Enabled under the Ethernet section.
- Set Ethernet Device Type to PCAP Switched, choose the Ethernet Device that connects this PC to your network, and close. (If PCSX2 will not launch and reports a missing runtime, the official guide's fix is the Visual C++ Redistributable from Microsoft.)
Create the network profile (inside the emulated PS2)
Using Star Wars Battlefront II as the example - the official network disc works too:
- Open the game's network menu, choose Add Setting and pick a memory card slot.
- Move one screen right and press Triangle for the advanced settings: the MAC address is shown here. Note its last 4 characters.
- Enter those 4 characters in the XLink IP calculator and calculate.
- Back out to the IP Address Setup screen, choose Manual, and enter the calculator's IP address, netmask and default router. On the next screen enter the Primary DNS the calculator shows (10.253.0.1).
- Run the Connection Test - on PCSX2 it succeeds (unlike on real hardware). Then name and save the setting.
Play
- Start XLink Kai and log in. On Windows, run it with administrator rights and allow it in the firewall.
- Open your game's arena under Game Arenas.
- In the game: Multiplayer > LAN > Join or Create.
- If you cannot see or join matches, open Kai's Metrics tab: your emulated PS2 should be listed. If it is missing, recheck the Ethernet Device Type (PCAP Switched) and the selected adapter, plus Kai's admin rights and firewall rule.
Notes
- Emulator and real-console players share the same arenas and matches; everyone still needs the same game version and updates.
- Finding players: the official Team XLink Discord runs game-specific channels, and fan Discords host regular game nights.