XLink Kai tunnels Nintendo Switch LAN and local wireless multiplayer over the internet. Team XLink documents Ryujinx support as experimental and Windows only, and it can play with other Ryujinx players and with real Switch consoles. This guide follows Team XLink's Ryujinx setup page. Team XLink wrote it for Ryujinx LDN 3.0.2 or newer, so menu names in the Ryubing continuation may differ. Use your own game and your own firmware and keys from your own Switch. ROM does not condone illegally downloading ROMs.
What you need
- Windows 10 or 11. Team XLink says macOS and Linux do not work yet.
- XLink Kai with a free account from teamxlink.co.uk, and Ryujinx set up normally.
- NPCAP version 1.31 (Team XLink says it is known to be stable). XLink Kai ships with WinPCAP, which does not work with the loopback adapter.
- A game from the supported games list: 25 games with LAN support and 198 with Local Wireless support, per Team XLink.
Set up
- Install NPCAP 1.31. In
C:\Program Files (x86)\XLink Kai\right-clickkaiLoopbackBridge64.exe, choose Run as Administrator, read the warning, press a key and select Nintendo Switch as the emulator type. Let it set up the loopback adapter, then close it. - In Ryujinx open Options > Settings and click the System tab. Check Enable VSync.
For LAN games:
- Check Enable Guest Internet Access.
- Click the Multiplayer tab and, under LAN, set Network Interface to XLink Kai Loopback Switch (the name ends in four characters).
- Save and close Ryujinx.
For Local Wireless games:
- Uncheck Enable Guest Internet Access.
- Click the Multiplayer tab. Under Multiplayer set Mode to ldn_mitm, and under LAN set Network Interface to XLink Kai Loopback Switch.
- Save and close Ryujinx.
Play
- Start XLink Kai and log in.
- Start kaiLoopbackBridge, follow the prompts and keep it open the whole time you play. After a few seconds XLink Kai should show a Nintendo Switch under Metrics.
- Only then start Ryujinx and the game. Ryujinx must not be running before the bridge.
- Open Game Arenas, pick the game's arena and play.
Notes
- Team XLink says Ryujinx players can play with each other and with real Switch consoles. LAN games work with unmodified, modified and Ryujinx players. Local Wireless games need a modified (CFW) Switch with ldn_mitm on the console side; unmodified consoles cannot join those.
- Players need the same game and version, and a game that works in Ryujinx.
- This is the project's own documentation; availability was not tested here. Team XLink's loopback bridge page lists Ryujinx (and Yuzu) as supported emulators (page), but its Switch emulator setup page covers only Ryujinx, so there is no Yuzu guide.